Sunshade Pole Socket W/CAP

Stainless Steel 316

• Designed with a 15° angle to create self-tensioning of poles, ensuring secure installment.
• Anti-rattle design incorporates a rubber bushing under the cap hinge to ensure that the cap stays in the open or closed position underway.
• Cap is designed to prevent water flowing directly into the socket. However, this socket is not self-draining and must be maintained to prevent corrosion and rusting that may result from sitting water.
• Requires a 28mm (1-1/8") installation hole with a 15° angle.
• Included U-shaped backing plate is required for installation and must be thru-bolted to prevent vessel damage and/or injury.
• Screw size M5 or #10.
• Stainless steel 304 spacer and locking nut are included.